Passie voor Audio en Muziek
AUDIOPAUL.nl


Specificaties Mark Levinson No. 333


Technical specifications:

Rated power output :
- 300 watt/channel continuous RMS power @ 8 Ohm
- 600 watt/channel continuous RMS power @ 4 Ohm
- 1200 watt/channel continuous RMS power @ 2 Ohm
(all power ratings from 20-20 kHz at 0,5% THD)

Frequency response: within 0.1 dB from 20-20 kHz
Signal to noise ratio: better than -80 dB (ref. 1 w.)
Input impedance:
- 100 kOhm (balanced)
- 50 kOhm (single-ended)
Voltage gain: 26.8 dB
Input sensitivity (2.83 V output): 130 mV
Input sensitivity (full output): 2.25 V
Output impedance: less than 0,05 Ohm from 20-20.000 Hz
Damping factor: greater than 800, 20 - 20.000 Hz @ 8 Ohm



Connector complement:
- four custom binding posts per channel
- one three-pins XLR balanced input connector per channel
- one RCA input connector per channel
- two 1/8 mini-jacks for remote turn-on
- two Mark Levinson communication ports
- one captive high currency AC-mains cord


Supply Capacitance: four 50.000µF capacitor (200.000 µF total)
two 2450 VA transformators
Power consumption: 350 Watt (± 5%) at idle, 200 Watt (± 5%) in standby


Dimensions (HxWxD): 26,16 x 44,6 x 48,54 cm.
Shipping weight: 68,2 kg.
klik op foto om terug naar mijn set te gaan klik op foto om terug naar mijn set te gaan

|Volg alle nieuwtjes en updates in het Weblog van Audiopaul!|Abonneer je op Blog.audiopaul.nl Feed voor artikelen, updates en het laatste nieuws!|Volg alle nieuwtjes en de laatste updates met Twitter!|Zoek in de website op trefwoord of onderwerp| Bookmark deze site! | | Ga naar het contactformulier! | ©Audiopaul 2001-2010 | Copyright/Info | Sitemap |Last update: 6-08-2010
Deze site kun je het best bekijken met Internet Explorer 5.0 of hoger en een resolutie van 1024x768
Powered by WebRing.
We Support Real Stereo